64 11 905 Removing and installing/replacing ventilation temperature sensor

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove DECORATIVE STRIP ON DASHBOARD IN MIDDLE

Pull temperature sensor (1) out of retaining lug (2).

Installation note:

Make sure rubber ring is correctly seated.

Fig 1: Identifying Temperature Sensor Out Of Retaining Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1) and remove temperature sensor (2).

Fig 2: Identifying Temperature Sensor And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.