64 11 374 Removing and installing (replacing) control panel for heating and air conditioning system
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove RADIO AND A/C CONTROL PANEL
The following operation describes the replacement.
Disconnect plug connection (1).
Release retainers (3) on air conditioning control panel (2) by pressing the retaining tabs (3) inward with a suitable tool.
At the same time press IHKA controls (2) forward out of retaining frame and remove.
Installation note:
The air conditioning control panel (2) must be felt and heard to engage in the retaining frame.
Retaining lugs on trim cover (1) must not be damaged.