64 11 326 Replacing the button caps of the heating and air conditioning system control panel

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

Tape area (1) around the button caps with adhesive tape.

Fig 1: Identifying Adhesive Tape Applying Area

G09929359

Courtesy of BMW OF NORTH AMERICA, INC.

Press blower rocker switch (1) on one side and pry it off on the other side with special tool 00 9 340 .

Fig 2: Pressing Blower Rocker Switch

G09929360

Courtesy of BMW OF NORTH AMERICA, INC.

Pry off remaining button caps (1) with special tool 00 9 340 .

Fig 3: Prying Off Remaining Button Caps

G09929361

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in button caps (1) into operating unit.

Remove adhesive tape.

Fig 4: Installing Button Caps Into Operating Unit

G09929362

Courtesy of BMW OF NORTH AMERICA, INC.

Check function of the air conditioning.