34 21 169 Removing and installing/renewing a brake anchor plate/brake guard plate at rear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove wheel bearing.
Unscrew bolts (1) and remove brake guard plate (2).
Installation note:
Replace screws.
Tightening torque 34 21 3AZ .
Remove retaining plate (2) in direction of arrow.
Feed out brake guard plate (3) over wheel hub.