61 71 030 Removing and installing/renewing all washer jets of windscreen washer system

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove RIGHT MICROFILTER HOUSING COVER .

Turn clamp (3) in direction of arrow and washer fluid line (2) in direction of arrow.

Disconnect plug connection (1) and remove from holder (4).

Fig 1: Removing Right Microfilter Housing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Press all washer jets (1) in direction of arrow upwards and remove.

Fig 2: Removing Washer Jets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs (1) must not be damaged.
Check ADJUSTMENT OF WASHER JETS and correct if necessary.
Observe FILLING CAPACITY FOR WINDSCREEN WASHER SYSTEM .

Fig 3: Identifying Retaining Lugs
Courtesy of BMW OF NORTH AMERICA, INC.