LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (General Electrical System - Repair) >> Tailgate Window Wiper >> 61 62 030 Removing and installing/replacing wiper arm on rear window

61 62 030 Removing and installing/replacing wiper arm on rear window

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Fold open protective cap (1) in direction of arrow.

Release nut underneath.

Tightening torque 61 62 2AZ .

Fig 1: Folding Open Protective Cap
G08530635Courtesy of BMW OF NORTH AMERICA, INC.

Detach wiper arm (1) with special tool 61 6 060.

Fig 2: Detaching Wiper Arm Using Special Tool (61 6 060)
G08530636Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Before fitting wiper arm, allow wiping system to run two wipe cycles into park position.

Adjust MEASUREMENT (A)  between wiper arm and rear window edge.

Fig 3: Identifying Dimension Between Wiper Arm And Rear Window Edge
G04792471Courtesy of BMW OF NORTH AMERICA, INC.