61 31 137 Removing and installing/renewing USB interface connecting socket

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove SWITCH FOR FRONT PASSENGER AIRBAG DEACTIVATION .

NOTE: Open glove box.

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock retaining clips (2) on left/right.

Press out USB interface connecting socket (3) in direction of arrow.

Installation note:

Retaining clips (2) must not be damaged.

Make sure USB interface connecting socket (3) is correctly seated.