LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> X3 M40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 463 (General Electrical System - Repair) >> Switch >> 61 31 112 Removing and installing/replacing left or right shift paddle for automatic transmission

61 31 112 Removing and installing/replacing left or right shift paddle for automatic transmission

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Release screw (3).

Feed out wiring harness (2) and remove shift paddle for automatic transmission (4) in direction of arrow from steering wheel (5).

Installation note: 

Make sure shift paddle for automatic transmission (4) is correctly seated on steering wheel (5)

Make sure wiring harness (2) is laid exactly.

Fig 1: Removing Shift Paddle For Automatic Transmission
G06213480Courtesy of BMW OF NORTH AMERICA, INC.