61 13 050 Removing and installing/replacing power distribution box in passenger compartment
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Observe SAFETY INFORMATIONS
for handling vehicle battery.
Necessary preliminary tasks:
- Clamp off BATTERY LEAD FROM NEGATIVE CONNECTION POINT .
- Detach both battery cables for negative terminal in F03.
- Remove RIGHT GLOVE BOX WITH HOUSING .
Disconnect plug connection (1) from power distribution box in passenger compartment (3) and junction box electronics.
Unfasten screws (2).
Tightening torque 61 14 1AZ .
Feed out power distribution box in passenger compartment (3) from retaining clips (4) in direction of arrow.
UNLOCK AND DISCONNECT PLUG CONNECTIONS behind.
Replacement:
- Modify JUNCTION BOX ELECTRONICS .
- Modify fuses.