61 13 042 Replacing power distribution box (luggage compartment)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INFORMATIONS for handling vehicle battery.

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE CABLE .
Remove FLAP IN LUGGAGE COMPARTMENT PANEL ON RIGHT .

Unfasten plug connection (1) and disconnect.

Unscrew nuts (2).

Remove power distribution box (3).

Fig 1: Identifying Power Distribution Box Plug Connection With Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock all plug connections and disconnect.

Remove power distribution box (1).

Installation note:

Ensure correct cable routing.

Ensure that the power distribution box (1) is correctly seated.

Fig 2: Identifying Power Distribution Box

Courtesy of BMW OF NORTH AMERICA, INC.