61 35 975 Removing and installing/replacing bumper aerial for comfort access system
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- REMOVE rear bumper panel.
NOTE:
Graphic similar
Unlock associated plug connection and disconnect.
Release screw (1).
Remove bumper aerial (2) from fixture (3).
Installation note:
Make sure bumper aerial (2) is seated correctly in fixture (3).