51 16 Mirrors, Finishers, Ashtrays, Consoles
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - MIRRORS, FINISHERS, ASHTRAYS, CONSOLES
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exterior mirror to front door | F01/F02/F03/F04/F07/F10/F11/F18 | thread cutting | 6 Nm | |
| New exterior mirror initial screw connection | 8 Nm | ||||
| F15/F16/F25/F26/F85/F86 | thread cutting | 9 Nm | |||
| New exterior mirror initial screw connection | 11 Nm | ||||
| F06/F12/F13 | thread cutting | 8 Nm | |||
| 2AZ | Sun visor to body | F01/F02/F03/F04/F07/F10/F11/F18/F25/F26 | 2.5 Nm | ||
| 3AZ | Grab handle, front/rear | F01/F02/F03/F04/F07/F10/F11/F18 | 3 Nm | ||
| 4AZ | Support, center console | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | 4.5 Nm | ||
| 5AZ | Floor trim panel to carrier | F01/F02/F03/F04 | 2.5 Nm | ||
| 6AZ | Decorative trim to center console/support | F01/F02/F03/F04/F06/F12/F13 | 1.2 Nm | ||
| 7AZ | Holder, center console, front, middle, to tunnel | F01/F02/F03/F04 | 4.5 Nm | ||
| 8AZ | Center console to instrument panel | F01/F02/F03/F04 | 2.5 Nm | ||
| 9AZ | Decorative trim to center console | F01/F02/F03/F04 | Dia. 5 mm | Oval-head screw for light alloy | 4 Nm |
| F01/F02/F03/F04 | TS5 x 12 | Plastic screw | 2.8 Nm | ||
| 10AZ | Center console/support to dashboard | F01/F02/F03/F04 | 2.5 Nm | ||
| F12/F13 | 1.2 Nm | ||||
| 11AZ | Trim, rear, with rear compartment nozzle | F01/F02/F03/F04 | 2.5 Nm | ||
| 12AZ | Rear console to body shell holder | F01/F02/F03/F04 | 6 Nm | ||
| 13AZ | Oddments tray, center armrest, to support, center console | F01/F02/F03/F04/F07 | 1.5 Nm | ||
| F06/F12/F13 | 1.2 Nm | ||||
| 14AZ | Handle to inner part, lid, glovebox | F01/F02/F03/F04/F25/F26 | 1.5 Nm | ||
| 15AZ | Lid, glove box/end cover to housing | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1.5 Nm | ||
| 16AZ | Glove box/storage compartment to dashboard | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | 1.8 Nm | ||
| F25/F26 | 2.4 Nm | ||||
| 17AZ | Guide rail, roller sunblind, B-pillar | F01/F02/F03/F04 | Self-tapping screw, black | 2 Nm | |
| F03 | Replace screws. | 2.5 Nm | |||
| 18AZ | Roller sunblind module | F01/F02/F04 | Oval flange head screw (ISA) | 3 Nm | |
| F03 | 8 Nm | ||||
| F06/F07/F10/F11/F18 | 1.5 Nm | ||||
| F25/F26 | 0.7 Nm | ||||
| 19AZ | Electric motor to function carrier | F01/F02/F04 | Flat-head screw | 4.4 Nm | |
| F03 | 8 Nm | ||||
| 20AZ | Engine to function carrier, top | F01/F02/F04 | Oval-head screw | 2 Nm | |
| F03 | 3 Nm | ||||
| 21AZ | Vent window guide rail - window bar connection | F03 | 4.6 Nm | ||
| 22AZ | Center console to support | F07 | 1.8 Nm | ||
| 23AZ | Bracket, handle, to bodyshell | F01/F02/F04 | 3 Nm | ||
| 24AZ | Support to holder, support part | F12/F13/F06 | 2.5 Nm | ||
| 25AZ | Side bracket to support | F06/F12/F13 | 1.2 Nm | ||