33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Output shaft on drive flange hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M27 | Replace collar nut. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 45 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M16 | Observe the repair instructions. Replace collar bolt and spring. |
|||
| Jointing torque | 50 Nm | ||||
| Angle of rotation | 155 ° | ||||
| F03 | M27 | Replace collar nut. | 420 Nm | ||
| 2AZ | Wheel bearing to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws. | 100 Nm |