31 51 020 Replacing radial shaft seal for output shaft, right

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

31 5 130

Necessary preliminary work:

Remove RIGHT OUTPUT SHAFT .

Lever radial shaft seal (1) with a screwdriver (2) out of bearing block (3).

Fig 1: Removing Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Protective sleeve (1) serves to protect the sealing lips of radial shaft seal (2) from being damaged when the output shaft is inserted into the bearing block.

Fig 2: Identifying Protective Sleeve And Radial Shaft Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Drive in radial shaft seal with special tool 31 5 130 as far as it will go.

Fig 3: Identifying Special Tool 31 5 130

Courtesy of BMW OF NORTH AMERICA, INC.