31 51 065 Replacing O-ring for bearing block

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove BEARING SUPPORT .

Remove O-ring (1) with a suitable tool from bearing block (2).

Installation note:

Insert O-ring (1) in groove and coat with front axle differential oil.

Fig 1: Identifying O-Ring And Bearing Block

Courtesy of BMW OF NORTH AMERICA, INC.