24 00 Transmission in general
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION IN GENERAL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission to engine | ||||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M6 | 9 Nm | ||
| Torx bolts | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP70Z/GA8HP90Z | M10 | 38 Nm | ||
| GA8HP45Z/GA8P75H | M10x10.9 | 56 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M8 | 19 Nm | ||
| GA8HP70Z (N63) | M8 | 21 Nm | |||
| Steel Torx screws | GA6HP19Z/GA6HP26Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M12 | 66 Nm | ||
| 2AZ | Transmission to engine N52/N53/N54/N55 Aluminum screws/bolts are not magnetic | GA6HP19Z/GA6HP26Z/GA8HP45Z | Replace screws Jointing torque and angle of rotation must be observed without fail | ||
| GA6HP19Z | M10x30 | Jointing torque | 20 Nm | ||
| Angle of rotation | 90-110 ° | ||||
| GA6HP19Z | 10x85 | Jointing torque | 20 Nm | ||
| Angle of rotation | 180-200 ° | ||||
| GA6HP19Z/GA8HP45Z | M12 | Jointing torque | 25 Nm | ||
| Angle of rotation | 130 ° | ||||
| 3AZ | Cover plate for transmission | GA6HP19Z/GA8HP45Z | M6 | 9 Nm | |