13 64 501 Removing and installing/replacing a fuel injector (N52T)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove FUEL INJECTION PIPE .

Recycling

Fuel escapes when fuel line is detached. Catch and dispose of escaping fuel.

Observe country-specific waste disposal regulations.

NOTE: This procedure is applicable to all fuel injectors.

Lever out fuses (1).

Pull fuel injectors out of fuel rail.

Installation note:

Replace sealing rings on fuel injectors and coat with rubber care product.

Fig 1: Removing Fuses

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Check stored fault message.
Delete fault memory.
Check injection system for leak tightness.