13 62 Sensors for control unit
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Camshaft sensor to cylinder head | N52T | M6 | 9 Nm | |
| 2AZ | Crankshaft sensor to crankcase | N52T | M6 | Replace aluminum screws. | |
| Jointing torque | 3 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Knock sensor to crankcase | N52T | M8 | Replace aluminum screws. | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 4AZ | Differential pressure sensor to air intake system | N52T | K50x20 | 6 Nm | |
| 5AZ | Coolant temperature sensor | N52T | M12x1.5 | 13.5 Nm | |
| 6AZ | Magnet wheel to eccentric shaft | N52T | M6x20 | 8 Nm | |
| 7AZ | VVT sensor to bearing bracket | N52T | M6x14 | 8 Nm | |
| 8AZ | Hot-film air mass meter | N52T | 2 Nm | ||