11 51 000 Removing and installing/replacing coolant pump (N47 D20 O1)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Installation note:

All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
Retaining elements on chassis and suspension and steering parts must be replaced.

Necessary preliminary tasks:

Remove DRIVE BELT for alternator
REMOVE EXHAUST-GAS RECIRCULATION COOLER
REMOVE COOLANT THERMOSTAT

Release bolts (1) and remove coolant pump.

NOTE: Picture shows N47.

Fig 1: Identifying Bolts Of Coolant Pump

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Seal coolant pump (1) with LIQUID SEALING COMPOUND 2.2 .

Fig 2: Identifying Coolant Pump Sealing Area

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Vent cooling system and check for leak tightness.