11 61 085 Removing and installing/replacing adjuster (N47 D20 O1)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: The adaptation values must be reset before the adjuster is replaced.

Necessary preliminary work:

Reset adaptation value with diagnosis system.
Remove acoustic cover. See 13..... REMOVE ACOUSTIC COVER (N47 D20 O/T1) .

Disconnect plug connection (1).

Release screws (3).

Detach adjuster (2).

Installation note:

Observe installation position at linkage.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.