11 00 Removing and installing/replacing ignition coil cover (N52T)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Tightening torque: 11 12 6AZ .

Remove ignition coil cover (2) towards top.

Fig 1: Identifying Ignition Coil Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.