11 74 507 Replacing the pressure converters for exhaust turbocharger (N20)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove ACOUSTIC COVER .

Disconnect plug connection (1).

Remove vacuum line (OUT).

Unfasten screws (2).

Remove pressure converter (3).

Installation note:

If the pressure converter is renewed, the (VAC) line must be converted.

Fig 1: Identifying Pressure Converter And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Check function of DME.