11 41 Oil pump with strainer and motor
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake pipe on oil pump housing | N20/N26 | M6 | 10 Nm | |
| 2AZ | Counterbalance shafts module to bedplate | N20/N26 | M8x75/M8x40 | Jointing torque | 19 Nm |
| Angle of rotation | 90 ° | ||||
| 3AZ | Chain module to crankcase and oil pump | N20/N26 | M6x30 | 10 Nm | |
| 4AZ | Hydraulic valve of oil pump to crankcase | N20/N26 | M6x14 | 10 Nm | |
| 5AZ | Camshaft sprocket to counterbalance shaft | N20/N26 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Torque | 95 Nm | ||||
| 6AZ | Counterbalance shafts module to bedplate | N20/N26 | M6x25 | 10 Nm | |
| 7AZ | Oil pump to counterbalance shaft housing | N20/N26 | M6x70 | 10 Nm | |