11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | ASA screw (connecting rod bolt) Connecting rod bearing cap to connecting rod. |
N52T | M8 x 47 | Replace screw. Screw washed and oiled. Joining torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | ||||
| Torque angle | 120 ° | ||||