32 00... Moving vehicle into design position
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Move VEHICLE INTO NORMAL POSITION .
- F01/F02/F07/F11/F15/F16: Version with air suspension system:
- Remove ignition key.
- Pull fuse for air supply unit control unit.
- Add/distribute weights in area of spring struts until the vehicle ride height is within the tolerance. See FRONT AXLE - RIDE HEIGHT, BMW, F25
or REAR AXLE - RIDE HEIGHT, BMW, F25
).
Measure VEHICLE RIDE HEIGHT .