0495471 119510 Device AM

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 BMW X3, 2016 BMW X3, 2015 BMW X3, 2014 BMW X3, and 2013 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For mounting the radial shaft seal of the crankshaft, front.

Consisting of:

0495472 Basic body
0495473 Screw
NOTE: (screws (2 x))
0495474 Holding sleeve
NOTE: (Sliding sleeve)
0495475 Holding sleeve
NOTE: (Pressure sleeve) Can no longer be ordered separately. Only available as part of set 11 5 330 = 83 30 0 495 127.
0495476 Nut
NOTE: (Nut with bearing) Can no longer be ordered separately. Only available as part of set 31 2 120 = 83 30 0 491 909.