Installing the belt tensioner
NOTE:
TECHNICAL INFORMATION
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
- Guide the belt tensioner (1) in at the alternator and install.
- Tighten screws (arrows).
TIGHTENING TORQUES SPECIFICATION
| Belt tensioner to alternator/starter motor generator | ||
| M8X30 | Tightening torque | 28 Nm |
Follow-up work
- Refer to INSTALLING ALTERNATOR .
- Refer to FASTENING AIR CONDITIONING COMPRESSOR .
- Refer to INSTALLING THE DRIVE BELT FOR ALTERNATOR .
- Refer to INSTALLING THE ACOUSTIC COVER FOR THE ENGINE AT THE FRONT .
- Refer to INSTALLING THE THROTTLE BODY .
- Refer to INSTALLING CHARGE AIR LINE .
- Refer to INSTALLING CLEAN AIR PIPE .
- Refer to INSTALLING RESONATOR .
- Refer to INSTALLING ACOUSTIC COVER .
- Refer to RECONNECTING ALL BATTERY GROUND LEADS