Remove the coolant feed line for the exhaust gas turbocharger

Preliminary work 

• Refer to BRINGING FRONT COMPARTMENT LID IN THE SERVICE POSITION .
• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING THE COVER OF THE ENGINE COMPARTMENT AT THE REAR LEFT .
• Refer to REMOVING THE COVER OF THE REAR RIGHT ENGINE COMPARTMENT .
• Refer to REMOVING THE SEAL FOR THE HOOD REAR .
• Refer to REMOVING LEFT AND RIGHT WIPER ARM .
• Refer to REMOVING THE COWL COVER .
• Refer to REMOVING THE TENSION STRUT AT THE SHOCK TOWER ON THE LEFT AND RIGHT .
• Refer to REMOVING THE FIREWALL UPPER PART .
• Refer to REMOVING ACOUSTIC COVER AT REAR .
• Refer to REMOVING THE TOP RIGHT AND LEFT COVER IN THE ENGINE COMPARTMENT .
• Refer to REMOVING STAND FOR THE HOOD GASKET LEFT AND RIGHT .
• Refer to REMOVING THE LEFT AND RIGHT FRONT-END STRUT .
• Refer to REMOVING FRONT CROSS CONNECTION .
• Refer to REMOVING THE REAR TOP CROSS CONNECTION .
• Refer to REMOVING INTAKE SILENCER HOUSING .
• Refer to REMOVING ENGINE VENTILATION LINE .
• Refer to REMOVING CLEAN AIR PIPE .
• Refer to PARTIALLY RELEASING THE HOLDER OF THE POSITIVE BATTERY CABLE .
• Refer to REMOVING THE LAMBDA OXYGEN SENSOR .
• Refer to REMOVING THE OXYGEN SENSOR MONITOR .
• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
• Refer to REMOVING THE CENTER UNDERBODY PROTECTION .
• Refer to REMOVING REAR UNDERBODY PROTECTION .
• Refer to REMOVING THE FRONT RIGHT LOWER WHEEL ARCH COVER .
• Refer to DRAINING THE COOLANT FROM THE HIGH-TEMPERATURE COOLING SYSTEM .
• Refer to CONNECTING THE COOLANT LINE TO THE HIGH-TEMPERATURE COOLANT RADIATOR .
• Refer to REMOVING TANK COVER ON LEFT AND RIGHT .
• Refer to REMOVING THE CONNECTING SUPPORT FROM THE TUNNEL .
• Refer to REMOVING EXHAUST SYSTEM .
• Refer to REMOVING CATALYTIC CONVERTER .
• Refer to REMOVING THE OIL RETURN LINE FOR THE EXHAUST TURBOCHARGER .
• Refer to REMOVING THE FAN COWL .
• Refer to REMOVING CHARGE AIR LINE .
• Refer to REMOVING THE ADAPTER FOR ENGINE VENTILATION LINE WITH HEATING ELEMENT ON EXHAUST TURBOCHARGER .
• Refer to REMOVING EXHAUST TURBOCHARGER .
• Refer to REMOVING THE COOLANT RETURN LINE FOR THE EXHAUST TURBOCHARGER .
• Refer to REMOVING THE OIL FEED LINE FOR THE EXHAUST TURBOCHARGER .

• Twist the coolant feed line (1) in arrow direction. 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide out the coolant feed line (1) and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.