Install coolant feed line

• Replace the O-rings (1).

  Parts:  O-rings

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the coolant feed line (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the coolant feed line (2) at the engine block.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the coolant feed line (1) at the exhaust turbocharger.
• Position the coolant return line (2) at the exhaust turbocharger.
• Tighten down screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RESONATOR WITH THE TOP CLEAN AIR PIPE .
• Refer to INSTALLING INTAKE FILTER HOUSING .
• Refer to INSTALLING THE RIGHT FRONT-END STRUT .
• Refer to FILLING THE HIGH-TEMPERATURE COOLING SYSTEM WITH THE VACUUM FILLING EQUIPMENT .
• Refer to VENTING THE HIGH-TEMPERATURE COOLANT SYSTEM .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING THE FRONT BOTTOM RIGHT WHEEL ARCH COVER .
• Refer to INSTALLING THE CENTER UNDERBODY PROTECTION .
• Refer to INSTALLING THE FRONT UNDERBODY PROTECTION .