Measure minimum brake disc thickness (rear brake)
- Check minimum brake disc thickness:
Place the special tool 0 495 451 (34 1 280) at three measuring points in area (1) and measure.
Compare measurement result and lowest value with setpoint value.
New brake pads may only be installed if the brake disc thickness is greater than the minimum brake disc thickness.
TECHNICAL DATA SPECIFICATIONMinimum brake disc thickness MIN TH (nominal dimension 330x20) Minimum brake disc thickness MIN TH (brake disc 330x20) 18.4 mm TECHNICAL DATA SPECIFICATIONMinimum brake disc thickness MIN TH (nominal dimension 345x24) Minimum brake disc thickness MIN TH (brake disc 345x24) 22.4 mm TECHNICAL DATA SPECIFICATIONMinimum brake disc thickness MIN TH (nominal dimension 370x24) Minimum brake disc thickness MIN TH (brake disc 370x24) 22.4 mm