Supplying The New Parts Required
NOTE:
TECHNICAL INFORMATION
For additional information see: 41 00... REPAIR TECHNIQUES, REPAIR STAGE 2 (X3) .
- Observe the procedure for repair stage 2.
For additional information see: 41 00... REPAIR TECHNIQUES, REPAIR STAGE 2 (X3) .
- For information about stripping and rebuilding operations, refer to the surrounding text in the AIR. See the FRU number.
- Prepare the following new parts (see Electronic Parts Catalog (EPC)):
Rear wall (1)
Reinforcement plate, door sill
Reinforcement plate, C-pillar
Reinforcement plate, D-pillar
Plastic nut
NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... OVERVIEW OF CONSUMABLES (ELECTRONIC PARTS CATALOG) (X3) . - Supply the following consumables:
Material Quantity Adhesive K5 (195 ml) 1 Adhesive K5 (50 ml) 1 Blind rivet N3 10 Punch rivet N4 60 Punch rivet N5 10 EMC screw 3 Cleaning agent R1 1 Cleaning agent R2 1 Cavity protection wax remover Sealant D1