Installing the top air flap control/air duct
- Connect the top air flap control (3) with the appropriate connector.
- Feed in the top air flap control (3).
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Air flap control/Brake ventilation duct | ||
| Oval-head screw | Tightening torque | 4.0 Nm |
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Air flap control/Brake ventilation duct | ||
| Oval-head screw | Tightening torque | 4.0 Nm |
Follow-up work
- Install front BUMPER COVER .
- Partly install the front sections of both front wheel ARCH COVERS .
- Partially install both front wheel ARCH TRIMS .
- Install front ORNAMENTAL GRILLE .
- Install the top left and right engine compartment COVER .
- Install the front hood SEAL .