Install the front top cross connection
- Attach the front top cross connection (2).
- Tighten the screws (1).
TIGHTENING TORQUES SPECIFICATION
| Top front cross connection to hood lock support | ||
| Screw | Tightening torque | 11.8 Nm |
Follow-up work
- Install AIR DUCT .
- Install REINFORCEMENT STRUT .
- Install the top AIR FLAP CONTROL/AIR DUCT .
- Install the front hood SEAL .
- Install front bumper COVER .
- Partly install the front sections of both front wheel arch COVERS .
- Partially install both front wheel arch TRIMS .
- Install front ORNAMENTAL GRILLE .
- Install front CROSS CONNECTION .
- Install the top left and right engine compartment COVER .