Check the gap dimension of the hood
NOTE:
TECHNICAL INFORMATION
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For ADDITIONAL INFORMATION see: 41 00... Gap dimensions for body
The gap dimensions form the basis for these repair instructions and must be observed without fail.
For ADDITIONAL INFORMATION see: 41 00... Gap dimensions for body
Check
- Check gap dimensions between the hood and the side panels.
Desired state
- Gap dimension does not correspond to the secondary document 41 00... BODY DIMENSIONS .
Result
» Gap dimension does not correspond to the secondary document 41 00...BODY DIMENSIONS .
Measure
- Adjust hood.