Releasing attachments from the front axle support

• Only on right side:  Release the screws (3)  and remove the holder for the washer fluid reservoir (2)  .
  NOTE: Perform the steps on the right and left side.
• Loosen screws (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side.
• Unlock the clip (1)  of the locking mechanism (2)  from the holder for the charge air cooler.
• Completely remove the locking mechanisms (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screw (2)  of the engine mount (3)  at the front axle (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Perform the steps on the right and left side.
• Loosen screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.