11 27 Dual-mass counterbalance shaft and idler gear
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 BMW X1, 2021 BMW X1, 2020 BMW X1, 2019 BMW X1, and 2018 BMW X1. However, it is still accessible from the selected car via links, so may be relevant.
11 27 DUAL-MASS BALANCE - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening Instructions | Torque Specification | |
|---|---|---|---|---|
| 1AZ Gear to counterbalance shaft | B46M0/O0/B48M0/O0 | M10 |
|
20 Nm 180° |
| 2AZ Idler gear to crankcase | B46M0/O0/B48M0/O0 | M12 |
|
10 Nm 45° |
| Special tool 2 288 054 to crankshaft | |
| tightening torque | 20 Nm |