Tightening the VANOS central valve of the exhaust camshaft adjuster
- To tighten VANOS central valve (1), use reversible ratchet (2) from special tool 0 496 855
with special tool 2 450 487
.
- Tighten VANOS central valve (1) of the exhaust camshaft adjuster.
TIGHTENING TORQUE SPECIFICATIONS
| VANOS central valve to camshaft | ||
| M21/M22 | 1. Joining torque | 10 Nm |
| 2. Joining torque | 30 Nm | |
| 3. Joining torque | 50 Nm | |
| 4. Angle of rotation | 35° | |
Follow-up work
- Refer to DISASSEMBLING ALL SPECIAL TOOLS .
- Refer to INSTALLING CHAIN TENSIONER .
- Refer to CHECKING THE TIMINGS OF THE CAMSHAFT .
- Refer to INSTALLING THE HEAT SHIELD ON THE EXHAUST TURBOCHARGER, TOP .
- Refer to INSTALLING THE OXYGEN SENSOR MONITOR .
- Refer to INSTALLING LAMBDA OXYGEN SENSOR .