Install the front power window switch
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Release all latch mechanisms (arrows) on the trim (2) on both sides.
- Guide the power window switch (1) out of the trim (2).
- Check the lock (1), clamps (2) and the guides (3) on the trim (4) for damage. Replace the trim (4) if necessary.
The latch mechanism, clamps and guides must not be missing or damaged.
- Connect the associated connector with the power window switch (1).
- Engage the power window switch (1) in direction of arrow into the armrest.