Install the flat motor for the rear power window

• Engage the flat motor (2) precisely at the marked points on the power window (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) for the flat motor (2) at the same time.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Flat motor to power window regulator
  Screw	tightening torque	7 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR POWER WINDOW REGULATOR .
• Refer to INSTALLING THE SOUND INSULATION ON THE REAR DOOR .
• Refer to INSTALLING REAR DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .
• Refer to INITIALIZING THE POWER WINDOWS .