Removing the front right deformation element

Preliminary work 

• Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
• Refer to REMOVING THE INTAKE MANIFOLD FOR INTAKE SILENCER HOUSING .
• Refer to REMOVING INTAKE SILENCER HOUSING .
• Refer to REMOVING THE AIR DUCT TO THE RADIATOR .
• Refer to REMOVING FRONT CROSS CONNECTION (AIR DUCT REMOVED) .
• Refer to RELEASING WASHER FLUID RESERVOIR .

• Unlock locking pins (1) on the cross connection (3) to the bottom.
• Thread out and remove locks (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lift radiator module (1) from the lower holders and slide slightly to the left.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the screws (1) with the special tool  2 463 965  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Loosen screws (2).
• Loosen screws (3).
• Guide out the front right deformation element (4) toward the front and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.