Installing the bearing bracket (automatic transmission)
- Install bearing bracket (3).
- Replace nuts (2).
Parts: Nuts
- Install the nuts (2) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Pedal bracket on body Replace nuts . | ||
| M8 Replace nuts. |
Tightening torque | 24 Nm |
- Connect the plug connection (1).
- Replace nuts (1).
Parts: Nuts
- Install the nuts (1) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Brake booster to pedal assembly console Replace nuts . | ||
| M8 Replace nuts. |
Tightening torque | 24 Nm |
- Install the retaining bolt (1) through the brake pedal.
Lightly grease the retaining bolt (1).
- Replace the retaining clip (2).
Parts: Retaining clip
- Mount the retaining clip (2) on the retaining bolt.
- Install air duct (1).