Install the optional equipment system (SAS)

• Install the optional equipment system (SAS) (3)  .
• Replace screws (2)  .

  Parts:  Screws

• Insert screws (2)  and tighten.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Optional equipment system (SAS) to body
  Replace screws.	Tightening torque	8 Nm

• Connect the plug connection (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE TRUNK COMPARTMENT LIGHT .
• Refer to INSTALLING THE MOUNTING OF THE 12-V SOCKET IN THE REAR .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
• Refer to INSTALLING TOOLKITS .
• Refer to INSTALLING THE EMERGENCY WHEEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
• Refer to INSTALLING TRIM PANEL FOR STORAGE SHELF (PARCEL SHELF) .
• Refer to PROGRAM/ENCODE THE OPTIONAL EQUIPMENT SYSTEM (SAS) .