Installing the cover on the window frame

Precondition 

The door window glass is open.

• Make sure the cover (1) is correctly fitted in the joint of the rubber window seal (2).
• Make sure that the cover (1) is correctly fitted on the door seal.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the cover (1) at the top on the door frame.
• Connect the plug connection.
• Clip in the cover (1) at the clamps (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE COVER ON THE DOOR HANDLE .