Attaching the sound insulation for the windshield panel

NOTE: TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .

Clean the adhesive area for the sound insulation (1) for the windshield panel.
Replace the sound insulation (1) for the windshield panel.
Parts: sound insulation
Stick the sound insulation (1) for the windshield panel along the mark (2) on the windshield.

Courtesy of BMW OF NORTH AMERICA, INC.