Installing the ignition coils

• Feed in and install the ignition coil (1) in the direction of the arrow.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screw (2) on ignition coil (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Ignition coil to cylinder head cover
  Screw M6	Tightening torque	8 Nm

• Connect connectors (1) and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure the connector (1) engages audibly.
• Insert connector (2) in the direction of the arrow and install.
• Ensure that the locking mechanism (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to IF INSTALLED: PARTIALLY INSTALLING ENGINE VENTILATION LINE .
• Refer to INSTALLING ACOUSTIC COVER .