Installing the rear wheel arch trim

NOTE: TECHNICAL INFORMATION
Detents, guides and mounting elements must not be damaged or missing.

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Check the clips (3) for damage and replace where required.
The clips (3) must not be damaged or missing.
Feed in wheel arch trim (2) and engage on the clips (3).
Snap the wheel arch trim (2) into the bumper with the locks.
Mount blind rivet (1) using the special tool 0 496 521 (00 2 230) .

Courtesy of BMW OF NORTH AMERICA, INC.