Remove sound insulation on the rear door
NOTE:
Description is for left component only. Procedure on the right side is identical.
Preliminary work
- Refer to REMOVING COVER ON DOOR HANDLE .
- Refer to REMOVING REAR DOOR TRIM .
NOTE:
TECHNICAL INFORMATION
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
Notes on the sound insulation must be strictly observed for these repair instructions.
For additional information see: NOTES FOR BONDING SOUND INSULATION (SI), DOORS .
- When cutting through the sealing bead (1) make sure not to damage the sound insulation (2) and any potentially routed cables.
- Use a suitable, sharp cutting tool (3) to cut through the sealing bead (1) of the sound insulation (2) in the corresponding area.
- Observe the position of the sealing bead (3) for the sound insulation (1).
- Remove the sound insulation (1) from the inner door panel.