11 15 016 Removing and installing/replacing engine ventilation connecting line
Necessary preliminary work:
- Remove RIGHT INTAKE SILENCER HOUSING .
IMPORTANT:
Increased risk of line (2) breakage
Use a screwdriver (1) to unlock all the latch mechanisms one after the other.
Pull off the connection line (2) at the same time.
IMPORTANT:
Increased risk of line (2) breakage
Use a screwdriver (1) to unlock all the latch mechanisms one after the other.
Pull off the connection line (2) at the same time.
Feed out the connection line (2) and remove.
Installation note:
No catches (1) are permitted to be damaged or missing.
If there is a faulty latch mechanism (1), the line must be replaced.