LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2018 >> M6 Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System - Repair - F12 >> Engine Radiator With Attachment >> 17 11 000 Removing and installing radiator (N63 B40/B44 O 0/1)

17 11 000 Removing and installing radiator (N63 B40/B44 O 0/1)

WARNING: Risk of scalding!
Only perform this repair work after engine has cooled down.
IMPORTANT: Wear safety goggles and protective gloves.

Necessary preliminary tasks: 

Release screws (1) on left and right from cover (3).

Tightening torque 17 10 1AZ .

Release screws (2) behind sealing lip.

Tightening torque 17 10 1AZ .

Lift out cover (3).

NOTE: (Images show N54, procedure identical on N63)
Fig 1: Identifying Cover, Sealing Lip And Screws
G06889272Courtesy of BMW OF NORTH AMERICA, INC.

Remove radiator (1) towards top.

NOTE: (Images show N54, procedure identical on N63)
Fig 2: Removing Radiator
G06889273Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

FILL THE COOLING SYSTEM .

Visual inspection of cooling system for tightness.