34 21 Rear Brake
TIGHTENING TORQUE SPECIFICATION - REAR BRAKE
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Brake disc to wheel hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M8 | Replace screw | 16 Nm |
| 2AZ | Brake anchor plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12x1.5 | 110 Nm | |
| F03 | M14x1.5 | Replace screws.
IMPORTANT:
Observe 4 phase tightening!
|
|||
| Jointing torque | 150 Nm | ||||
| Release | min.90 ° | ||||
| Jointing torque | 150 Nm | ||||
| Angle of rotation | 180°± 15° | ||||
| F25/F26 | M12x1.5 | Replace screws. | |||
| Jointing torque | 75 Nm | ||||
| Angle of rotation | 45°10° | ||||
| 3AZ | Protective plate to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M6 | Replace screws | 12 Nm |
| 4AZ | Guide screw (brake caliper to brake anchor plate) | F01, F02, F03, F04, F07 | WAF 7 | 30-5 Nm | |
| 5AZ | Guide screw (brake caliper to brake anchor plate) | F06/F10/F12/F11/F13/F18/F25/F26 | WAF 13 | Replace screws | 35 Nm |